Project Material on CHEMICAL CHARACTERISTICS OF WASTE WATER FROM NIGERIA BREWERIES

Project Material on CHEMICAL CHARACTERISTICS OF WASTE WATER FROM NIGERIA BREWERIES

CHEMICAL CHARACTERISTICS OF WASTE WATER FROM NIGERIA BREWERIES

CHEMICAL CHARACTERISTICS OF WASTE WATER FROM NIGERIA BREWERIES

 

CHAPTER ONE

INTRODUCTION

1.1 Background of the Study

Groundnut seeds, also known as peanuts, are a vital crop globally, prized for their high oil content and nutritional value. The extraction of oil from groundnut seeds is a critical process in the food industry, agriculture, and industrial applications. Various solvents can be employed in oil extraction processes, each with distinct characteristics affecting yield, efficiency, and the quality of the extracted oil. The choice of solvent plays a crucial role in determining the effectiveness of the extraction process.

The primary solvents used for oil extraction include methanol, acetone, and n-hexane. Methanol is a polar solvent that can interact with both polar and non-polar compounds, potentially affecting the composition of the oil extracted (Molina et al., 2022). Acetone, another polar solvent, is often used in extracting essential oils due to its ability to dissolve a wide range of organic compounds (Feng et al., 2019). N-hexane, a non-polar solvent, is widely utilized for its efficiency in extracting oils due to its low boiling point and high solubility for non-polar substances (Lee et al., 2021).

The efficiency of these solvents can be influenced by various factors including their polarity, boiling point, and extraction conditions such as temperature and time. Understanding these factors is crucial for optimizing the extraction process to achieve the highest yield and quality of oil. Recent studies have shown that different solvents can significantly affect the oil yield and the profile of the extracted oil (Zhang et al., 2023). Methanol has been found to extract oil with a different fatty acid profile compared to n-hexane, which could impact the oil's nutritional and functional properties (Liu et al., 2020).

Methanol is often favored in laboratory settings due to its ability to dissolve a broad range of compounds, but its use in large-scale industrial extraction is limited by its high cost and potential health hazards (Kumar et al., 2019). Acetone, while less commonly used than n-hexane, offers a good balance of extraction efficiency and solvent recovery but may leave residues affecting the oil's purity (Chen et al., 2022). N-hexane remains the most widely used solvent in commercial oil extraction due to its efficiency and lower cost, though concerns about its environmental impact and health effects have prompted research into alternative solvents (Huang et al., 2021).

The choice of solvent affects not only the yield but also the quality of the extracted oil. The fatty acid composition, antioxidant activity, and overall nutritional value of the oil can vary significantly depending on the solvent used (Yuan et al., 2022). For instance, oils extracted with n-hexane typically have a higher yield but may lack some beneficial compounds compared to those extracted with methanol or acetone (Wang et al., 2020).

Moreover, the extraction process must be optimized to balance efficiency with environmental and economic considerations. Research into alternative and greener solvents, such as those derived from natural sources, is ongoing to improve the sustainability of oil extraction processes (Zhou et al., 2023). Advances in extraction technologies and the development of more efficient and environmentally friendly solvents are essential for enhancing the overall effectiveness of groundnut oil extraction (Baba et al., 2021).

In conclusion, the extraction of oil from groundnut seeds using different solvents is a complex process influenced by various factors including the properties of the solvent, extraction conditions, and the desired quality of the oil. Ongoing research aims to optimize these factors to improve both the efficiency and sustainability of the extraction process.

1.2 Statement of the Problem

The efficiency and quality of oil extraction from groundnut seeds can be significantly influenced by the choice of solvent used in the extraction process. While n-hexane remains the predominant solvent in commercial extraction due to its high efficiency and low cost, there are concerns about its environmental impact and potential health risks (Huang et al., 2021). Methanol and acetone, though less commonly used, offer different extraction efficiencies and may affect the quality of the extracted oil differently (Molina et al., 2022; Feng et al., 2019). There is a need for a comparative study to evaluate the performance of these solvents in terms of oil yield, quality, and environmental impact. This study aims to address the gap in understanding the relative effectiveness of methanol, acetone, and n-hexane in extracting oil from groundnut seeds.

1.3 Objectives of the Study

The main objective of this study is to determine the effectiveness of different solvents in extracting oil from groundnut seeds.

Specific objectives include:

i.               To evaluate the impact of methanol, acetone, and n-hexane on the yield of oil extracted from groundnut seeds.

ii.             To determine the quality of oil extracted using each solvent in terms of fatty acid composition and other nutritional parameters.

iii.           To find out the environmental and health implications associated with using methanol, acetone, and n-hexane in the extraction process.

1.4 Research Questions

i. What is the impact of methanol, acetone, and n-hexane on the yield of oil extracted from groundnut seeds?

ii. What is the quality of oil extracted using methanol, acetone, and n-hexane in terms of fatty acid composition and nutritional parameters?

iii. How does the use of methanol, acetone, and n-hexane in the extraction process affect environmental and health considerations?

1.5 Significance of the Study

This study is significant as it provides insights into the efficiency and quality of oil extraction from groundnut seeds using different solvents. By comparing methanol, acetone, and n-hexane, the research will help identify the most effective solvent for optimizing oil yield and quality. Additionally, it will offer valuable information on the environmental and health impacts of each solvent, contributing to more sustainable and safer extraction practices in the oil industry.

1.6 Scope of the Study

The scope of this study is limited to the extraction of oil from groundnut seeds using three different solvents: methanol, acetone, and n-hexane. The study will focus on evaluating oil yield, quality, and the environmental and health implications of using each solvent. The research will be conducted in a controlled laboratory setting, and the findings will be applicable to the field of oil extraction and processing.

1.7 Limitations of the Study

The study may face limitations such as variability in the quality of groundnut seeds, which could affect the extraction results. Additionally, the use of solvents like n-hexane raises concerns about environmental and health risks, which may limit the applicability of the findings to commercial practices. The study's laboratory setting may not fully replicate industrial conditions, potentially affecting the generalizability of the results.

1.8 Definition of Terms

Groundnut Seeds: Seeds of the peanut plant, known for their high oil content and nutritional value.

Extraction: The process of separating oil from seeds using solvents.

Methanol: A polar solvent used in laboratory settings for oil extraction.

Acetone: A polar solvent used for extracting essential oils and other organic compounds.

n-Hexane: A non-polar solvent widely used in commercial oil extraction due to its efficiency and low cost.

Oil Yield: The amount of oil extracted from seeds, typically expressed as a percentage of the total weight of seeds.

Fatty Acid Composition: The profile of fatty acids present in the extracted oil, which affects its nutritional and functional properties.

Environmental Impact: The effects of solvent use on the environment, including potential pollution and resource depletion.

Health Implications: The potential health risks associated with the use of solvents, including toxicity and exposure effects.

---